Epson Stylus Color 900 Manual page 36

In Automatic mode,
the Halftoning setting
is selected based on
the data in your print
job. In Custom mode,
Halftoning is
preselected for each
project type setting.
Some of the print
options at the bottom
left of the Advanced
dialog box are
automatically
selected or disabled
by the Print Quality
(resolution) you
choose.
Advanced Printing
6 Choose one of the following Halftoning options:
No Halftoning
Select when printing black text only.
Error Diffusion
For printing photographic images. Blends each color dot with the
dots around it.
Fine Dithering
For printing graphs or other images that require precise, solid areas
of bright colors.
7 Choose any of the following print options:
MicroWeave
This option is automatically selected or disabled by the Print Quality
you choose and is not user selectable. MicroWeave prints graphic
data in finer increments to eliminate unwanted banding (light
horizontal lines).
High Speed
For fast, bidirectional printing at lower quality. If vertical lines in your
printout are misaligned when you use the High Speed setting, you
may need to turn it off or align the print head; see
Head for instructions.
Flip Horizontal
For printing a mirror image of your document. Use with iron-on
transfer paper so your ironed-on printout will read correctly.
Finest Detail
For printing text, graphics, and line art with very sharp edges. Slows
print speed and increases your system memory requirements.
Aligning the Print
Page 36