Epson Stylus Color 900 Manual page 179

Possible cause
You're using a switch
box with your printer.
Your video driver may
be conflicting with the
EPSON printer driver.
The margins are incorrect
Possible cause
Margins are set
incorrectly in your
software application.
Paper settings in the
printer software are
incorrect for your
paper size.
The image size or position is incorrect
Possible cause
The paper and/or
layout options are set
incorrectly.
Troubleshooting
Solution
Connect the printer directly to your computer and try printing again.
Try using a standard VGA video driver (see your computer or video card
documentation for instructions on changing video drivers). If your printout
is correct, your video driver is interfering with the printer driver. Contact
your computer or video card manufacturer to see if an updated driver is
available.
Solution
Check your software documentation for instructions on selecting the
correct margins for your paper size. Make sure the margins are within the
printable area of the page. See
Select the correct paper settings for your paper size. Make sure the
Printable Area setting is correct for your project. See
Size and Orientation Options
information.
Solution
Check the paper settings and the settings in the Layout dialog box (not
available for Windows 3.1). See
Options for instructions. Also check the paper and layout settings in
your application software.
Printable area for more information.
and Printing on Special Media
Selecting Paper Size and Orientation
Selecting Paper
for more
Page 179