Network Printing; For Windows 95 And 98 Users; Setting Up The Host System - Epson Stylus Color 900 Manual

This section
describes how to use
your printer as a
shared printer on a
network. To connect
your printer directly to
a network without
setting it up as a
shared printer,
consult your network
administrator.

Network Printing

Before you can use your printer on a network, you must configure your
computer as described in the following sections.

For Windows 95 and 98 Users

If your computer is on a Windows 95 or Windows 98 network and you
want other users to share the printer connected to it, you need to:
set up the system connected to the printer (host system) so the printer
can be shared
define a path to the printer on each client computer
Before following the steps here, make sure you've installed the printer
software on all the computers that will use the printer. See the Start Here
card for instructions.

Setting Up the Host System

Follow these steps to share a printer connected directly to your computer
with other computers on a network:
1 Click Start, point to Settings, then click Control Panel.
2 Double-click Network.
3 Click the File and Print Sharing button.
Network Printing
Page 122