Quick-Dial; Storing A Quick Dial Number; Dialling A Quick Dial Number - Geemarc BDP400 User Manual

Talking telephone with large lcd display

Hide thumbs Also See for BDP400:

Table of Contents

OPERATION

Quick-dial

To store a quick dial number, press the "Menu" button to

enter the menu. The display will show and announce the

word "Store". Press the "Ok" button to confirm. Using the

keypad, enter the desired number (up to 22 digits - each of

which will be announced if voice function is on). Use either

the "

", "

" or "C" buttons if necessary to cancel any

digit input incorrectly. When the number is correct, press

the "Ok" button followed by the preferred speed dial

location (M1, M2, M3 buttons) by pressing the

corresponding button (these three memory buttons are

located on the right side on the front of the telephone, one

above the other and are marked with one, two and three

tactile marks respectively).

Press the desired quick dial button (M1, M2 or M3).

Lift the handset, or press the "Ok" button, or press the "

button for hands-free use.

Voice clock function

Press the VC key

on top of the unit for the phone to

play the time and date and for the LCD display to show the

current time and date.

Note: VC key

will not work if the telephone is off the

hook.

Table of Contents

Show Quick Links

Table of Contents