Sawgrass Technologies CHROMABLAST C88 Getting Started Manual page 21

Sawgrass Technologies, Inc.
ChromaBlast Getting Started Guide for the EPSON Stylus C88 /C88 +
™
7. Obtain the long tube holder
and remove the tabs from the
back exposing the adhesive.
Place the tube holder in the flat
gray area just beneath the
buttons on the printer.
8. Slide tubing into the holder for
placement.
9. Position the tubing so that the
black line on it lines up with the
edge of the tube holder.
Note: This will leave enough
slack so that the cartridge bay
can easily slide from one side of
the printer to the other without
creating tension on the tubes.
19