Sawgrass Technologies CHROMABLAST C88 Getting Started Manual page 20

Sawgrass Technologies, Inc.
ChromaBlast Getting Started Guide for the EPSON Stylus C88 & C88 +
™
4. Insert the plastic cross bar into place by sliding the notched end into
the back of the chip holders as shown.
5. Gently slide the cartridges
through the hole in the cartridge
cover. Start with the black
cartridge on the left and attach the
cartridges in this order:
(from left to right)
Black, Cyan, Magenta,
and Yellow
6. Obtain the foam block, place
it on top of the cartridges, and
close the cartridge cover. Be
careful not to pinch the tubes
when closing the cover.
18