Table of Contents
Advertisement
Sawgrass Technologies, Inc.
5. Once all ink bags are connected inside your Quick Connect II™ ink
box, you will need to obtain the small primer bottle to prime each line.
6. Take the cartridge in one
hand and the priming bottle
in the other. Squeeze the
priming bottle to release all
of the air and insert it into
the bottom of the cartridge
to pull ink through the line
until a small amount of it
reaches the reservoir.
7. Once ink is in the
reservoir, pinch together the
clamp that's connected to
the tube on the outside of
the box. This will ensure
that no more ink will pull into
the reservoir until you are
ready for it.
8. Repeat Steps 6 & 7 for
each cartridge.
9. Place the lid back onto the Quick Connect II™ ink box and gently
place the cartridges on top of the box while you are completing the
printer setup.
16
ChromaBlast
Getting Started Guide for the EPSON Stylus C88 & C88 +
™
Remember to match the
right color ink to its
corresponding cartridge
chamber. Once the tube is
filled, there is no way to
undo it!
Advertisement
Table of Contents
