Integrated Peripherals - Gigabyte GA-990FXA-UD5 User Manual

2-6

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
OnChip SATA Controller
OnChip SATA Type
x OnChip SATA Port4/5 Type
x OnChip SATA RAID5 Support
OnChip SATA3.0 Suuport
x OnChip SATA Port as ESP
F_USB3.0 Controller
eSATA3 Controller
eSATA3 Ctrl Mode
GSATA3 Controller
GSATA3 Ctrl Mode
Onboard LAN Function
Onboard LAN Boot ROM
 SMART LAN
Onboard Audio Function
Onboard 1394 Function
R_USB3.0 Controller
USB Controllers
USB Legacy Function
higf: Move Enter: Select
F5: Previous Values
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
USB Storage Function
Onboard Serial Port 1
higf: Move Enter: Select
F5: Previous Values
OnChip SATA Controller (AMD SB950 South Bridge)
Enables or disables the SATA controller integrated in the AMD SB950 South Bridge. (Default: Enabled)
OnChip SATA Type (AMD SB950 South Bridge, SATA3_0~SATA3_3 connectors)
Configures the operating mode of the integrated SATA3_0~SATA3_3 controller.
Native IDE Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
RAID Enables RAID for the SATA controller.
AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
Integrated Peripherals
[Enabled]
[Native IDE]
IDE
Enabled
[Enabled]
Press Enter
[Enabled]
[Enabled]
[IDE]
[Enabled]
[IDE]
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Integrated Peripherals
[Enabled]
[3F8/IRQ4]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 45 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup