Epson Artisan 50 Series Quick Manual page 23

9. Insert the new ink cartridge into the holder and push it down until it clicks
into place.
10. Once you replace all the cartridges that need replacing, close the cartridge
cover, then close the printer cover.
11. Press the H ink button to begin charging the ink. This takes about two
minutes. When it's finished, the P power light stops flashing and remains on,
and the H ink light goes out.
Caution:
Never turn off the printer while ink is charging or you'll waste ink. If the
flashes, press the
Note:
If you remove a low or expended ink cartridge, you cannot reinstall and use the
cartridge.
ink button again and press down all the cartridges securely.
H
H
Replacing Ink Cartridges
ink light
23