Epson ActionLaser 1600 User Manual page 42

If you want to delete a command that appears in the Select
command to send list box, select the command and click
Delete From List.
5. In the Select command to send list box, select the
command line you want to send to the printer.
Click Send Text. This sends the selected command line to
6.
the printer.
7. Click Done to close the General Printer Options dialog box.
Resetting the printer
The Reset option allows you to reset the printer to return all
EpsonScript settings to the factory defaults. This software reset
feature is not the same as the hardware reset feature available
on the printer.
Note:
Any downloaded fonts and all print jobs are flushed from memory
during a reset.
Enabling or disabling the startup page
The startup sheet is a page that prints automatically each time
you power on the printer. It contains information about the
printer status. Click Enable if you want the startup page
printed; otherwise, click Disable.
The startup page is not available on all printers.
3-18 Using EpsonScript in a Macintosh Environment