Epson A251B Owner's Manual page 7

❏ Keep the entire computer system away from potential sources
of electromagnetic interference, such as loudspeakers or the
base units of cordless telephones.
❏ Do not use a damaged or frayed power cord and AC adapter.
❏ If you use an extension cord with the printer, make sure that
the total ampere rating of the devices plugged into the
extension cord does not exceed the cord's ampere rating. Also,
make sure that the total ampere rating of all devices plugged
into the wall outlet does not exceed the wall outlet's ampere
rating.
❏ Never disassemble, modify, or attempt to repair the AC
adapter, power cord, printer, and option by yourself except
as specifically explained in the printer's guides.
❏ Unplug the printer and the AC adapter, and refer servicing to
qualified service personnel under the following conditions:
The power cord or plug is damaged; liquid has entered the
printer or the AC adapter; the printer or the AC adapter has
been dropped or the casing damaged; the printer or the AC
adapter does not operate normally or exhibits a distinct
change in performance. (Do not adjust controls that are not
covered by the operating instructions.)
❏ Do not use with wet hands.
If you plan to use the printer in Germany, the building
installation must be protected by a10 or 16 amp circuit breaker
to provide adequate short-circuit protection and over-current
protection for this printer.
7