Casio QV-5700 User Manual page 157

CONNECTING TO EXTERNAL EQUIPMENT
5.
Click the control button to apply it.
• When you turn on any Card Browser (Type 1 through
4), the camera creates a file named "INDEX.HTM" in-
side the DCIM folder whenever you turn off camera
power. Other files are also created and stored on the
memory card at this time.
6.
Press MENU to exit the setting procedure.
NOTE
• The amount of time it takes for the camera to power
down depends on the number of files on its memory
card. If your card has a large number of files, we rec-
ommend that you normally leave the Card Browser
turned off if you do not need to use it. The power down
routine performed by the camera is much shorter
when the Card Browser is turned off.
IMPORTANT!
• When the Card Browser is turned on, turning off cam-
era causes the monitor screen goes blank, but the op-
eration/card access lamp continues to flash for some
time as the camera internally creates Card Browser
files. Never perform any of the operations listed below
while the operation/card access lamp is flashing. Do-
ing so not only stops creation of Card Browser files, it
can also result in corruption of the image data on the
memory card.
— Opening the memory card slot cover
— Unplugging the AC adaptor
— Opening the battery compartment cover
— Other actions similar to those above
• Note that Card Browser files may be corrupted if bat-
teries go low or if the memory card becomes full dur-
ing file generation.
• You can specify the language for the Card Browser's
on-screen text using the procedure under "Changing
the Menu Language" (page 132).
155