Casio QV-5700 User Manual page 136

OTHER SETTINGS
" Macintosh
1.
Set the bundled CD-ROM into your Macintosh's
CD-ROM drive.
2.
Connect the camera to your Macintosh using
the USB cable (page 147).
• Use the USB cable that comes bundled with the cam-
era.
• You can also access the memory card directly from
your Macintosh without connecting to the camera. See
page 149 for more information.
3.
Open the CD-ROM volume named "CASIO".
4.
Open the "Camera Language" folder.
5.
Open the folder that contains the language set
you want to use.
6.
Open the camera memory card displayed
(mounted) on your Macintosh screen.
7.
Copy the "menu_!!!.bin" file from the folder
you opened in step 4 to the folder you opened
in step 5.
8.
Disconnect the USB cable connecting the cam-
era to your Macintosh (page 149).
• If you accessed the memory card directly with your
Macintosh, use the required procedure to eject the
memory card.
! Loading Menu Language Data into the Camera
IMPORTANT!
• If power to the camera is cut off while you are loading
menu language data, the camera's program will not be
able to run correctly and you will need to take your
camera in for repair before you can use it again. Be-
cause of this you must observe the following precau-
tions whenever performing the procedure below.
— Use the AC adaptor to power the camera or load a
new set of recommended batteries into the cam-
era.
— Never touch the camera while the menu language
data is being loaded.
134