Cropping An Image - Casio Exilim EX-Z4U Function Manual

PLAYBACK

Cropping an Image

Use the following procedure when you want to crop a
portion of an enlarged image and use the remaining part of
the image as an e-mail attachment, Web page image, etc.
1.
In the PLAY mode, use [ ] and [ ] to scroll
through images and display the one you want
to crop.
2.
Press [MENU].
3.
Select the "PLAY"
tab, select
"Trimming", and then
press [ ].
• This causes a cropping
boundary to appear.
4.
Use the zoom button (
cropping boundary larger or smaller.
• The size of the cropping boundary depends on the
size of the image on the display.
) to make the
90
5.
Use [ ], [ ], [ ], and [ ] to move the
cropping boundary up, down, left, or right
until the area of the image you want to extract
is within the boundary.
6.
Press [SET] to extract the part of the image
enclosed in the cropping boundary.
• If you want to cancel the procedure at any point,
press [MENU].
IMPORTANT!
• Cropping an image creates a new file that contains
the cropped image. The file with the original image
also remains in memory.
• An image recorded using the 2304 x 1536 (3:2) pixel
size cannot be cropped.
• Voice recording file images cannot be cropped.
• An image recorded using another camera model
cannot be cropped.
• If the message "This function is not supported for this
file." appears, it means that the current image cannot
be cropped.
• The cropping operation cannot be performed if there
is not enough memory to store the cropped image.