Epson Stylus Color 850N User Manual page 69

Custom Printing
Note:
If your monitor displays
only 16 colors, the
Intensity adjustments are
not shown in the Layout
graphic. If you choose the
No Halftoning setting, the
Intensity setting does not
determine how your
watermark is printed.
3. Now select the way you want the watermark to appear by
choosing the following options. The Layout graphic
changes to reflect all the settings you choose.
lets you choose a color for your predefined
Color
watermark:
Red
or . You cannot select a color for a custom
Yellow
watermark; it is printed in its original colors.
sets the lightness or darkness of the
Intensity
watermark (from 5% to 100%) based on where you
move the slidebar.
To adjust the size and position of the watermark, move
the cursor over the Layout graphic. Four boxes appear
in the corners of the graphic and the cursor changes to
a hand.
To move the watermark, click anywhere inside the
graphic and drag it into one of five positions: center,
upper-right, upper-left, lower-right, or lower-left.
To resize the watermark, move the cursor over one of
the corner boxes; the cursor changes to a pointing
hand. Click and drag the box corner to reduce or
enlarge the watermark.
4. If you're finished changing Layout options, click
close the Layout dialog box.
3-32
, , , ,
Black Blue Aqua Lime
Click and drag
anywhere in here to
move the watermark
Click and drag one of
the corner boxes to
resize the watermark
, ,
Fuchsia
to
OK