Technical Specifications
Changing control
panel settings
Control Codes
ESC/P 2 control codes
Setting
Network I/F mode
Loading position
Economy
Follow these steps to change the settings listed above:
1. Make sure the printer is turned off and has paper loaded.
2. Hold down the
color cleaning button and press the
X
button. The printer prints a summary of instructions for
changing settings and choosing the language to use for additional
instructions.
3. Press the
X
color cleaning button to print a list of current settings
and additional instructions.
4. After you make the changes you want, turn the printer off to save
the settings. The settings remain in effect until you change them
again.
®
See the ESC/P
Reference Manual for more information about these
commands.
General operation:
ESC @, ESC U, ESC EM
Paper feeding:
CR, FF, LF, ESC 0, ESC 2, ESC 3, ESC +
Page format:
ESC ( C, ESC C, ESC C 0, ESC Q, ESC l, ESC ( c, ESC N, ESC O
Print position motion:
ESC $, ESC \, ESC ( V, ESC ( v, ESC D, HT, ESC B, ESC J, VT
Font selection:
ESC k, ESC x, ESC X, ESC P, ESC M, ESC g, ESC p, ESC 4, ESC 5,
ESC E, ESC F, ESC !
Font enhancement:
ESC W, DC 4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T,
ESC S, ESC -, ESC ( -, ESC q
Spacing:
ESC Space, ESC c, ESC ( U
Character handling:
ESC t, ESC ( t, ESC R, ESC %, ESC &, ESC :, ESC 6, ESC 7,
ESC ( ^
Bit image:
ESC *
C-8
Options
Off, On
8.5 mm, 3 mm, Others
Off, On
power
P