Epson Stylus Color 850N User Manual page 139

After you install your printer software, you see the Windows 95 New
Hardware Found window.
Possible cause
An operating system error
has occurred.
You see a spooling error message (Windows).
Possible cause
If you see error messages
or printing is very slow, the
problem may be caused by
temporary files (Windows
3.1 only).
Your hard drive is too full.
Your computer doesn't
have enough memory for
the file you're printing.
You see a memory error message (Macintosh).
Possible cause
You need to increase the
memory allocation for your
application, EPSON
Monitor3, or both.
In Windows 95, the Status Monitor 2 window doesn't appear.
Possible cause
You may not have restarted
your computer after
installing Status Monitor 2.
You don't have both parts of
Status Monitor 2 installed.
Solution
Click Do not install a driver, and then click OK. Never select any
other option on the New Hardware Found window.
Solution
Change the Spool Manager default directory (Windows 3.1 only),
following the instructions in Chapter 4.
Delete unnecessary files to make room on the drive.
Try one of the following:
Reduce the resolution of your image.
Select fewer colors or a lower resolution for your display or
monitor.
Add more memory to your computer.
Solution
Choose Get Info from the File menu when the application is active
or EPSON Monitor3 is selected and increase the memory
requirements. See Chapter 4 for more information. If that doesn't
work, turn off background printing if it's on (you won't be able to
use Monitor3).
Solution
Start Shut Down
Click , select
Yes
and click to restart your computer. Then try using Status
Monitor 2.
Status Monitor 2 comes in two parts: one that finds the printer on
the network, and the other that recognizes your specific printer.
Uninstall Status Monitor 2 and reinstall it as described in the Setup
Guide .
7-11
Troubleshooting
Restart the computer
, click ,