Epson Stylus Color 850N User Manual page 123

Setting Up for HP-UX Systems
You can use either ftp or rlp (lpr) to print from an HP-UX
system. You use the SAM utility to set up both. Before starting
SAM, enter a unique IP address and host name in the /etc/hosts
file. See "Setting Up the Printer as a Network Device" on
page 6-13 for information on assigning an IP address and host
name.
RLP setup
On the printer definition page of SAM, use the following
settings:
Printer Name
Remote System Name
Remote Printer Name
Remote Council Model
Remote Status Model
Make System Default
Printer Class
Restrict Council
Remote Printer on BSD system
To print, use either rlp or the following:
lpd -d <printer name>
Using FTP with HP-UX
Follow these steps to use ftp with HP-UX:
1. Type the following:
lpshut
lpadmin -p<spooler name> -m<modelscript> -v/dev/
null
accept <spooler name> enable <spooler name>
lpsched
6-21
Using the Ethernet Card
Any name
Use name in /etc/hosts
Nothing or 'lps,' 'lpaf,' etc, if
using filters
/bin/true
/bin/true
Enter as appropriate
Nothing
Nothing
Nothing