Epson Stylus Color 850N User Manual page 112

Using the Ethernet Card
Note:
Choose a port name that
identifies the printer, such
as 850NPRN. You can use
up to seven characters,
but you can't use any of
the following:
/ \ . [ ] : ; | > < + = ? * $ "
If you plan to use a shared
print queue that receives
print jobs from other
workstations, install either
the IBMNULL or MSNULL
printer driver. To select
the device to connect to,
choose the port name
entered in step 2.
5. Copy all the files in the PIPES directory to the remote print
service directory (substitute the CD-ROM or diskette drive
letter for D):
For TCP/IP, type:
COPY D:\OS2\TCPIP\PIPE\*.* C:\EPNET
For NetBEUI, type:
COPY D:\OS2\NETBEUI\PIPE\*.* C:\EPNET
6. Type to change to the remote print service
CD\EPNET
directory.
Your remote print service directory now contains these files:
TCP/IP NetBEUI
ADDPORT.CMD ADDPORT.CMD Adds ports on the server
DELPORT.CMD DELPORT.CMD
PORTCHG.EXE PORTCHG.EXE
REMPRT.EXE REMPRT3.EXE
REMDRV.EXE REMDRV3.EXE
REMSTAT.EXE REMSTAT3.EXE Printer status program
Configuring the Printer for Remote Print Service
Follow these steps to set up remote print service:
1. Open an OS/2 full screen command session from the
server.
2. Go to the remote print service directory
3. Use the
ADDPORT <port name>
port for the printer.
4. If necessary, install the printers and create queues attached
to your workstation. See your OS/2 documentation for
information.
6-10
Description
Removes ports from the
server
Program used to add or
remove ports
Remote Print Service
program
Remote Print Service driver
.
CD\EPNET
command to define a