Canon POWERSHOT A75 User Manual page 27

Turning the Pewer On/Off
1 Press the ON/OFF button until the
power indicator lights green (p. 16).
Shooting Mode
• Current shooting settings will appear in the
LCD monitor for about 6 seconds,
_7 If you turn the mode switch to [_, the lens
will retract after approximately 1 minute,
Playback Mode
• The LCD monitor displays an image.
Turning the Camera Off
• Press the ON/OFF button again to turn the
power off,
• You will hear a start-up sound and see
the start-up image when the power
comes on, (To change the start-up
sound and image, see below and pages
72and 115,)
• The start-up image does not appear
when the LCD monitor is off in Shooting
mode or the AN OUT terminal is
connected to a TV.
Turning on the camera without the start-
up sound and image
Press and hold the SET button, then
turn on the power.
Power Saving Function
;i i,
This camera is equipped with a power saving
function, Depending on the power saving setting
(p, 70), the camera may power down or the LCD
monitor may go off automatically,
• Auto Power Down
[On]:
Shooting mode:
Powers down approximately 3 minutes after the
last time a camera control is accessed.
Playback mode:
Powers down approximately 5 minutes after the
last time a camera control is accessed.
Printer connection mode:
Powers down approximately 5 minutes after the
last time a camera control is accessed or
something is printed on the printer.
25