Canon VIXIA HFM300 Instruction Manual page 97

(_ NOTES
• A video snapshot scene can be captured only during playback; it can-
not be captured during playback pause mode.
• _ The captured video snapshot scene is saved to the same
memory that contains the source scene.
• Video snapshot scenes cannot be captured from any of the following
types of scenes.
- Scenes shorter than 1 second
- Scenes that were edited using the supplied software ImageMixer 3
SE and were then written back to the camcorder.
• When the source scene is itself a video snapshot scene, you may not
be able to capture a video snapshot scene depending on the length of
the source scene and the length currently selected for video snapshot
scenes.
• When you start capturing a video snapshot scene less than 1 second
from the end of the scene, the video snapshot scene will be captured
starting from the beginning of the following scene.
• During the playback of video snapshot scenes captured from a previ-
ously recorded movie, you may notice some anomalies in the picture/
sound at the point where the playback switches to a new scene.
Capturing Photos
You can capture a single photo or a series of photos. The size of the
captured photos will be [MW 1920x1080] and it cannot be changed,
but you can select the photo quality.
Please read the IMPORTANT section ([_ 98) before using an Eye-Fi
card.
Operating modes:
1
To select the photo capture settings
_) [MENU] [Photo Captuie fr0m video]
[r-q sing!e Photo ] or[D__jPhot° Sequence] _} [2:)]
Continue from the same menu:
* The number displayed indicates the approximate number of photos that can be
recorded with the current quality setting.
Video *
97