Pre-Recording - Canon VIXIA HFM300 Instruction Manual

Powered IS
When shooting video, you can use Powered IStomake the image
stabilization even m ore p owerfu, Powered ISismost effective when
you are stationary and
zooming in on far subjects using high zoom
ratios (the more you approach the telephoto end). Holding the LCD
panel with your left hand will add to the stability of the shot
Press and hold POWERE_S; as long as
you want to activate Powered IS.
" _ appears in yellow, while ,¢_......._¢.j_\_/._
Powered IS is activated. \'i \\ _ _-
• You can change the operation of the \\o_--J___ "
[I_)_NEREDis:
button (long press or \_",_._
toggle on/oft) with the _ e "_ T_
[POWERED IS Button] setting.
(_ NOTES
• If the degree of camcorder shake is too high, the image stabilizer may
not be able to fully compensate.
• Powered IS is not available in mode.
• For surveying and following shots, when you pan the camcorder from
side to side or tilt it up and down, we recommend setting the IS mode
to [_ Dynamic] or [D Standard].
Pre-Rec0rding
The camcorder will start recording 3 seconds before you press
[STARi_/sTOP , ensuring you do not miss important shooting opportuni-
ties. This is especially useful when it is difficult to predict when to start
recording.
Operating modes: 1 ?
Video * 65