Program Ae - Canon EOS REBEL XS Instruction Manual

P" Program AE
To obtain a good exposure of the subject, the camera sets the exposure
(shutter speed and aperture) automatically. TMs is called Program AE.
so,,.oooooo,
_ Take the picture.
_ Press the shutter button halfway and
the camera will focus.
_y,, T he exposure setting (shutter speed
and aperture) set automatically is
displayed in the viewfinder.
_ Press the shutter button completely.
;_.'-Shooting Tips
®_ Changing the ISO speed and using the buHt4n flash°
To match the subject and lighting level, you can change the ISO
speed (p.57) or use the built-in flash (p.58). In the <P> mode, the
built-in flash will not fire automatically. So under low light, press the
<%> (Flash) button to pop-up the flash.
_ The program can be shifted. (Program shift)
After pressing the shutter button halfway, turn the <_> dial to
change the shutter speed and aperture setting combination
(program). After you take the picture, the program shift will be
canceled. Program shift is not possible with flash.
56
apedure disp!ay wi!l b!ink when you press the shutter
button halfway, as shown in the figure_ Jn low light (30"
3.5), either increase the IS0 speed _p,57) or use flash
(p.58), !n bright !ight (4000 22),decrease the ISO spee&