Shooting In A My Colors Mode; Contrast; Sharpness; Saturation - Canon POWERSHOT S2 IS User Manual

Contrast
• This function allows you to adjust the degree of brightness.
• Select from - (Weak), 0 (Neutral) and + (Strong).
Sharpness
• This function allows you to adjust how sharply outlines are defined.
• Select from - (Weak), 0 (Neutral) and + (Strong).
Saturation
• This function allows you to adjust the color depth.
• Select from - (Weak), 0 (Neutral) and + (Strong).
A My Colors mode easily changes the colors in an image when it is shot,
allowing you to alter the balance between red, green and blue, transform
pale or tanned skin or change a color specified in the LCD monitor into a
different color. Since they work with both stills and movies, these modes
let you enjoy producing various image or movie effects.
However, depending on the shooting conditions, the images may appear
rough or you may not get the expected color. Before you try to photograph
important subjects, we highly recommend that you shoot trial images and
check the results. Moreover, the camera will record both the My Colors
image and the original unaltered image if you set [Save Original] (p. 97) to
[on].
PositiveFilm Use this option to make red, green or blue colors more intense like the
Vivid Red,Vivid Greenor Vivid Blueeffects. It can produce intense
Lighter Skin naturel-appearingcolors like those obtained withpositive film.
Tone* Use th sop on to make sk n tones ghter.