Canon POWERSHOT A650IS User Manual page 17

I
Troubleshooting I
163
Too much light is shining • Change the shooting angle.
directly into the camera, or
is being reflected off the
subject.
Flash is set to on. • Set the flash to [] (Flash off) (p. 62).
ISO speed is too high. • Higher ISO speeds and [] (High ISO
Auto) setting may increase image
noise. For higher image quality, use
as low an ISO speed as possible
(p. 104L
• In I_1, [] and I_, ['_--'l, I _, []
modes in the SeN mode, the ISO
speed increases and noise can
appear.
Light from the flash has • This is a phenomenon that occurs
reflected offdust particles or with digital cameras and does not
insects in the air. This is constitute a malfunction.
particularly noticeable when
shooting using the wide
angle or when you increase
the aperture value in the
aperture-priority Av mode.
Light is reflected back from •Turn [On] the Red-Eye setting in the
the eyes when the flash is Rec. menu (p. 89). For this mode to
used in dark areas, be effective, the subject must be
looking right at the red-eye reduction
lamp. Try asking them to look directly
at the lamp.
Even better results can be obtained
by increasing the lighting in indoor
settings or approaching closer to the
subject.
• You can correct red eyes in images
using the Red-Eye Correction
function (p. 140).