Canon POWERSHOT A300 User Manual page 27

U
Power-saving Function
This
camera comes 13!]in a power-saving fur_ctJon.
Shooting Mode
Tile power will automaticaily shut off approximately 3
minutes after the last function is accessea
Replay Mode
The power will automaticaily shut off approximately 5
minutes after the last function _s accessed.
While Connected to a Printer (optional)
The power will automatically shut off approximately 5
minutes after the last camera function is accessed or
prin[er ceases [o print an image.
• The Dower-saving function will not activate _vhi]e tile
camera is in auto play mode and _s connecl:ed to a
computer (p. 75).
• The camera's settings can be changed to turn offthe
power-saving function (p. 109
• The LCD monitor wm go offin approximately 3 minutes
if there are no operauons performed within that time
when the LCD monitor _s or even if the power-saving
function is [Off]. [Note: The power wil_ not be Eurnea o_
at that point) Pressing any button turns the LCD
monitor on again
O To return from power-saving function
Shooting Mode
Slide the lever of lens cover down.
Replay Mode / While Connecting to a Printer
Press the F_ION button.
You can quickly switch the between the Shooting
and Replay modes. Images can be replayed and
erased immediately after shooting them. images can
also be shot immediately, while images are being
replayed.
Shooting Mode
Press the I_ION button to switch to
Replay mode.
Press the [_]ON button again or press the
shutter button halfway to return to the Shooting
mode.
Replay Mode
Open the lens cover to switch to
Shooting mode.
27