Canon EOS 5D MARK III Instruction Manual page 65

Troubleshooting Guide
[Eye_Fi settings] does not appear.
® [Eye=Fi settings] will appear only when an Eye-Fi card is inserted into
the camera. If the Eye-Fi card has a write-protect switch set to the
LOCK position, you will not be able to check the card's connection
status or disable Eye-Fi card transmission (p.344).
Part of the image blinks in black.
® [[_]3: Highlight alert] is set to [Enable] (p.247).
Areal box is displayed on the imageo
_ [r_3: AF point disp.] is set to [Enable] (p.247).
The image cannot be erased_
r,_ If the image is protected, it cannot be erased (p.272).
The movie cannot play.
® Movies edited with a personal computer cannot be played with the
camera.
When the movie is played, camera operation noise Can be heard,
¢_ If you operate the camera's dials or lens during movie shooting, the
operation noise will also be recorded. Use an external microphone
(commercially available) (p.235).
The movie has still moments.
¢_ During autoexposure movie shooting, if there is a drastic change in the
exposure level, the recording will stop momentarily until the brightness
stabilizes. If this happens, shoot with <M > shooting mode (p.223).
368