Installing And Removing The Card - Canon EOS 5D MARK III Instruction Manual

Installing and Removing the Card
Removing the card
Access lamp
Open the cover.
® Set the power switch to <OFF>.
® Make sure the access lamp is off,
then open the cover.
® if [Recording ...] is displayed, close
the cover.
Remove the card.
® To remove the CF card, push the
eject button.
® To remove the SD card, push it in
gently and release it. Then pull it out.
® Pull the card straight out, then close
the cover.
U
When the access lamp is lit or blinking, it indicates that images are
being written to or read by the card, being erased, or data is being
transferred. Do not open the card slot cover during this time. Also,
never do any of the following while the access lamp is lit or
blinking. Otherwise, it can damage the image data. card. or camera.
- Removing the card.
* Removing the battery.
. Shakingorbangingthecarneraaround.
if the card already contains recorded images, the image number may not
start from 0001 (p.154),
If a card-related error message is displayed on the LCD monitor, remove
and reinsert the card. If the error persists, use a different card.
if you can transfer al! the images on the card to a computer, transfer al
the images and then format the card with the camera tp.53). The card
may then return to normal.
Do not touch the SD card's contacts with your fingers or metal objec[s
33