ices
The camera uses a special Date battery to power its
internal clock. If the LCD monitor displays the Set Date/
Time menu when you turn on the camera, this means that
the Date battery has run down and the clock has stopped
running. Please purchase a replacement
battery (battery
type CR1220) and install it as follows. (The date battery
is preinstalled at the factory and may therefore expire
earlier than its rated lifespan after the camera has
been purchased.)
1.
Be sure that the camera
is turned
off.
2
Open
the
DiGiTAL
terminal
cover.
Pull out the date
battery
holder.
._x
-(3
C
t_
<
191