Canon POWERSHOT A60 User Manual page 191

UnidentifiedImage:You attempted to replay an image that was
recorded in a special format (proprietary format
used by the camera of another manufacturer,
etc.).
Cannot magnify!: You attempted to magnify an image that was
photographed with another camera, recorded in
a different format, or edited on a computer.
Cannot rotate: You attempted to rotate an image that was
photographed with another camera, recorded in
a different format, or edited on a computer.
Incompatible Cannot attach sound memo to the image
Wave format: because the image has some sound file
recorded in an inappropriate format.
Cannot register You attempted to register an image recorded
this image!: with another camera as a start-up image.
Protected!: You attempted to erase a protected image.
Too many marks: Too many images have been marked for
printing or for inclusion in a slide show. Cannot
process any more.
Cannot mark You attempted to set the print settings for an
image: non-JPEG file.
Exx: (xx: number) Camera malfunction. Turn the
power off and then back on, then shoot and
replay. A problem exists if the error code
reappears. Note the number and contact our
Canon Customer Support Help Desk. If an error
code displays directly after taking a picture, the
shot may not have been recorded. Check image
in replay mode.
.X
o_
<
187