Custom White Balance - Canon EOS-1D MARK III Instruction Manual

Custom White Balance
Custom white balance enables you to manually set the white balance
for a specific light source for better accuracy. Up to five Custom white
balance data can be registered to the camera. You can also append a
name (caption) to the registered Custom white balance data.
Registering Custom WB
There are two ways to register Custom white balance data. You can
either take a picture and register it, or register an image already saved
in the memory card.
[Record and register image]
ff_ Select [Custom WB regist.].
® Under the [_'] tab, select [Custom
WB registo], then press <_>.
,3
Select the Custom WB No. to be
registered.
® Press <_>.
® Turn the <O> dial to select I to 5 for
<_._._*>, then press < :_>. The
Custom WB data will be registered
under the selected No.
Select [Record and register
image].
® Turn the <Q> dial to select [Record
and register image], then press
_y,, T he LCD monitor will turn off, and the
selected No. [ * ] will blink on the rear
LCD panel.
64