Canon POWERSHOT A570 IS User Manual page 89

The subject is overexposed • Set the exposure compensation to a
because the surroundings negative (-) setting (p. 49).
are too dark. • Use the spot metering functions
(p. 48).
Too much light is shining • Change the shooting angle.
directly into the camera, or
is being reflected off the
subject.
Flash is set to on. •Set the flash to [] (Flash off)
(Basic Guide p. 12).
ISO speed is too high. • Higher ISO speeds and [] (High
ISO Auto) setting may increase
image noise. For higher image
quality, use as low an ISO speed
as possible (p. 53).
Oln _, _t, _._ *_ and _--"J,[]
; modes in the SCN mode, the ISO
speed increases and noise can
appear.
Light from the flash has • This is a phenomenon that occurs
reflected off dust particles or with digital cameras and does not
insects in the air. This is constitute a malfunction.
particularly noticeable when
shooting using the wide
angle or when you increase
the aperture value in the
aperture-pr!odty Av mode:
C
¢D
0
_Q
87