Canon POWERSHOT A570 IS User Manual page 77

You can play back images on a television with the supplied AV
cable.
Turn off the camera and the TV.
Connect the AV cable to the camera's A/V
OUT terminal.
• Open the terminal cover by slipping a
fingemail under the right edge and
plug the AV cable in all the way.
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
VIDEO
Tum on the TV and switch it to video mode.
Turn on the camera.
• The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 23). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may
not display properly.
• You can also use the TV as the display in the shooting
mode.
"o
E
m
_m.
75