Canon POWERSHOT SD630 DIGITAL ELPH User Manual page 65

Changing the Save Method for the
Original Image
When shooting still images in the Color Accent or Color
Swap mode, you can set whether or not to save the original
image (pre-transformation) as well as the transformed one.
[] (Rec,) Menu_[Save Original]_
[On]/[Off].
See Menus and Settings (p. 26).
elf [On] is selected, the two
images will be numbered
consecutively with the
altered image following the
original.
I_] When [Save Original] [On]
is Set to
- Only the transformed image displays in the LCD
monitor while shooting in the Color Accent or Color
Swap mode.
- The transformed image is reviewed in the LCD
monitor after shooting in the Color Accent or Color
Swap mode. If you erase the image at this point, the
original image is erased along with the transformed
image. Exercise adequate caution before deleting a
file.
- Since two images are recorded with each shot, the
number of shots remaining is approximately half the
number displayed when this function is set to [Off].
63