Canon POWERSHOT SD630 DIGITAL ELPH User Manual page 106

Subject is too close, oShoot within correct shooting
making the flash too distance of the subject when using
strong, the built-in flash (p. 122).
The subject is OSet the exposure compensation to a
overexposed because negative (-) setting (p. 51 ).
the surroundings are too OUse AE lock or use the spot
dark. metering function (pp. 48, 50).
Too much light is shining ;;OChange the shooting angle.
directly into the camera, ;;
or is being reflected off
the subject.
Guide p. 9 ).
ISO speed is too high.
; OHigher ISO speeds and the [] (High
; ISO Auto) setting may increase
image noise. For higher image
;; quality, select as Iowan ISO speed as
possible (p. 64).
o_, _J, m, [], II_, II_, [] and
I_l modes, the ISO speed increases
and noise can appear.
Light from the flash has oThis is a phenomenon that occurs
reflected off dust with digital cameras and does not
particles or insects in the constitute a malfunction.
air. This is particulady
noticeable when
shooting using the wide
angle.