Canon POWERSHOT SD630 DIGITAL ELPH User Manual page 137

Function
a
[] [] [] M
,Im
Page
[] [] [] •Will []
[][]ll
Digital Zoom o(8) - _ _) p.35
Evaluative _(lo) _{lo) _{lo) • _(lo)
Metering Center-Weighted Average - p.50
Method
Spot o o -
Exposure Compensation o p.51
Exposure Shift - - - o p.42
Long Shutter - - p,52
White Balance _/lo) _{lo) p.54
MyCo_o_ - pSZ
ISO Speed ,o_r _{m) _{m) p.64
Auto Rotate p,65
Grid Lines - p.27
o Setting available (o Default setting)
Setting can only be selected for the first image, (A Default setting)
(Shaded Area):Setting is retained even when the camera power is shut off.
With the exception of the []3me Zone], [Date/Time], [Language] and [Video System]
settings, all the other menu settings and changes made with the camera buttons can
be reset to the default values in a single operation (p. 31).
(1)(2) The recording pixets and frame rates for the Dll (Movie) mode are as follow&
Recording Pixels Frame Rate
[] [] •W•[]
[] [] []
[] - • - •
[] - • - •
(3) The default flash setting is Auto Red-eye Reduction in the [] [] [] [] modes,
Auto in the [F_[][] modes, and Offin the [][] modes.
- The flash cannot be set in [] mode.
- When the flash fires in [] mode, the camera will automatically use Slow Synchre mode.
(4) You cannot switch between the Macre/Infinity modes when the camera is in the [] []
modes,
(5) Cannot be selected in the [] or [] mode.
(6) AF cannot be selected in the [][]modes.
(7) The AF-assist Beam cannot be set in [] mode.
(8) [Off] cannot be selected in the [] mode.
(9) Can only be set and used in the [] mode.
(10) Automatically set by the camera.
(11) [] [] can be selected.