Printing Your First Page; For Windows - Epson 670 Setup Manual

The printer starts cleaning the print head and the P power light begins
flashing. Print head cleaning takes about thirty seconds to complete.
c
Caution:
Never turn off the printer while the P power light is flashing. Doing
so may damage the printer.
When the P power light stops flashing, print a nozzle check pattern to
3.
confirm that the head is clean and to reset the cleaning cycle.
If print quality hasn't improved after repeating the nozzle checking and
cleaning procedures four or five times, contact your dealer.

Printing Your First Page

After making sure your printer is operating correctly, you are ready to print
your first page. To familiarize yourself with the printer software, we
recommend printing one of the sample files provided with your printer
software. To print a sample file, follow the instructions for Windows or
Macintosh in this section.
If you choose to print your own document instead, open the document in
your application, then proceed to step 4 in the relevant section below,
making changes where appropriate.
Note:
See your software manual for details on how to use your application software.
Depending on the type of document you are printing and the type of paper you
are using, you may have to make settings different from those described in this
section.

For Windows

Follow these steps to print the sample file.
1. Make sure A4 or Letter size EPSON Photo Quality Ink Jet Paper is
loaded in the printer.
2. Insert the printer driver CD-ROM. If the Installer dialog box appears,
click .
3. Double-click the My Computer icon and then the CD-ROM icon. Then
double-click the sample.bmp file to open it.