Toshiba Satellite Pro M10 Series Maintenance Manual page 374

4 Replacement Procedures
5. Seat the LCD panel on the backlight unit assembled by the steps above. Make sure
there is no dust between the LCD panel and the backlight unit. If you find any foreign
matter, remove it.
Backlight unit
6. Fold the TCP of the source PCB, then the TCP of the gate PCB down.
Do not grasp both ends.
4-162
4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)
Figure 4-140 Installing the LCD panel
Figure 4-141 Folding TCPs down
Satellite Pro M10 Series Maintenance Manual (960-431)
LCD panel
Make sure the LCD panel fits
into the panel guide ribs.
TCP of source PCB
Do not grasp both ends.
Guide rib
TCP of gate PCB