Toshiba Satellite Pro M10 Series Maintenance Manual page 349

4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43)
3. Remove four screws from the side of the LCD module.
Screw
Screw
4. Turn the LCD module right side up.
5. Remove the top frame. When you remove it, wear gloves or finger guards to avoid
contaminating or damaging the LCD panel.
Release four latches securitng
the top frame with the lamp cover
Satellite Pro M10 Series Maintenance Manual (960-431)
Loosen the screws with 1.1kgf cm of torque.
Figure 4-106 Removing the screws
Figure 4-107 Removing the top frame
4 Replacement Procedures
Release the U-shaped side of
3
the top frame.
Release the latch securing the top frame
with the P-chassis
Screw
Screw
< Side view >
4-137