Toshiba Satellite Pro M10 Series Maintenance Manual page 369

4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)
10. Turn the LCD module right side up.
11. Remove the LCD panel from the backlight unit. When you remove the LCD panel,
wear finger covers or gloves to avoid staining or damaging the LCD panel and the
backlight unit.
Backlight unit
12. Turn the backlight unit upside down taking care not to damage or stain the sheets.
13. Remove two screws securing the lamp cover to remove it.
Screw
Satellite Pro M10 Series Maintenance Manual (960-431)
Figure 4-132 Removing the LCD panel
Loosen the screws with 1.0kgf
Figure 4-133 Removing the lamp cover
4 Replacement Procedures
cm of torque.
¥
LCD panel
Screw
Backlight unit
4-157