Toshiba E-STUDIO 232 User Functions Manual page 165

FAX
Function
INITIAL SETUP - DIAL TYPE
INITIAL SETUP - DIAL TYPE (LINE2)
*2
LINE-2 MODE
LINE-2 MODE - START
*2
LINE-2 MODE - END
RX PRINT - DISCARD
RX PRINT - REDUCTION
RX PRINT - DUPLEX PRINT
RX PRINT - ROTATE SORT
RECOVERY TX - STORED TIME
FAX RECEIVED FORWARD - AGENT1
FAX RECEIVED FORWARD - AGENT2
*1. These are printed only when the optional Fax unit is installed.
*2. These are printed only when the optional Fax unit and optional Line2 board are installed.
FILE
Function
MAINTENANCE
STORAGE MAINTENANCE
*1
*2
*2
*1
*1
*1
*1
*1
Description
Shows the dial type of the line 1.
Shows the dial type of the line2.
Shows the line2 mode.
Shows the start time to use the Line2 for
receptions only. This applies only when "RX
ONLY (TIMER)" is set to the LINE-2 MODE.
Shows the end time to finish using the Line2
for receptions only. This applies only when
"RX ONLY (TIMER)" is set to the LINE-2
MODE.
Shows whether the discard function is
enabled or disabled.
Shows whether the reduction is enabled or
disabled.
Shows whether the duplex print is enabled
or disabled.
Shows whether the rotate sort is enabled or
disabled.
Shows how many hours that a recovery
transmission job is to be stored.
Shows the agent type if the Fax Received
Forward is registered.
Shows the agent type if the Fax Received
Forward is registered.
Description
Shows whether the storage maintenance is
enabled or disabled.
Shows how many days the data in the local
folder is remained. This applies only when
the maintenance function is enabled.
User
NO
NO
NO
NO
NO
NO 5
NO
NO
NO
NO
NO
NO
User
NO
NO
163