Volume Settings; Speaker Settings; Start-Up Settings; Make Your Own Menu - TomTom 4CS01 User Manual

Make your own menu

Tap this button to add up to six buttons to your own personalised menu.
If there are only one or two buttons in your menu, both buttons are
shown in the Driving view.
Make your
own menu
If you have three or more buttons in your menu, then a single button is
shown in the Driving view which opens your menu when tapped.
Voices
Tap this button to change the voice that gives spoken directions and
other route instructions.
A wide range of voices are available. There are computer voices which
Change voice
can read street names and other information directly from the map and
there are human voices which have been recorded by actors.
Tap this button to set the type of spoken directions and other route
instructions your TomTom GO will read aloud.
Voice settings

Volume settings

Tap this button set the volume level for your TomTom GO. Move the
slider to change the volume.
Link volume to noise level
Volume
preferences
Select this option to set your GO to change the volume according to the
background noise. The noise level is constantly monitored by the
microphone on your GO. If there is a lot of noise in the car, your GO will
automatically increase the volume.
For example, if you are driving on the motorway, which is often very
noisy, the volume level on your GO will be increased. When you are
driving more slowly again, the volume level will be lowered by your GO.

Speaker settings

Tap this button to select the loudspeaker or loudspeaker connections
that are used on your TomTom GO.
Speaker
settings

Start-up settings

Tap this button to set what happens when your TomTom GO starts.
Start-up
settings
39