Windows Ce-Related Problems; Bluetooth-Related Problems - Pentax 3 User Manual

Make sure the printer driver is not inadvertently set to "No Feed
Mode."
You may advance the paper position by pressing and holding the main
switch while paper is loaded.
The printer ejects a partially printed page, and the
green DATA indicator light remains lit or blinking
Make sure the Paper Size selection is correct using the application's
dialog box.

Windows CE-related Problems

I get an error message on my WinCE HPC when I try
to print
Make sure the correct printer and port are selected. Make sure the
printer cable is connected or the IrDA ports are aligned (if using
infrared). Make sure the WinCE HPC is not connected to a PC. Try
resetting the WinCE HPC according to the manufacturer's directions.
There seems to be no way to print from my application
Your application may not support printing under Windows CE. Call
the application vendor and request an update.
The printing is VERY slow
Some WinCE HPCs print more quickly with infrared than cable. Try
both methods to determine the best for you.
I have to wait for a period of time after the last line of a
print job for the paper to eject.
This is normal. Each WinCE HPC has a different wait time after a
print job completes before it sends an eject signal to the printer.

Bluetooth-related Problems

Please see the Pentax website for FAQ and tips on
connecting to various operating systems and devices at
www.pentaxtech.com.
Page 62