Installing The Battery - Pentax 3 User Manual

Installing the Battery

1. Open the printer's battery cover by pressing the cover latch.
Push the cover away from the AC adapter receptacle. See
Figure 10.
2. Swing the cover open and remove it.
3. Gently push the battery connector into the terminal on the
inside of the printer's battery compartment. See Figure 11.
FIGURE 11. Pushing the battery connector into the terminal
CAUTION: Do not force the battery connector into the terminal. If
FIGURE 10. Opening the Battery Cover
you are having difficulty inserting the connector, make
sure the connector is not upside down. See Figure 11.
Page 38