Epson 2250 Manual page 10

ActionPrinter 2250
Table A: Language selection
Language Light 1
English OFF
OFF
French
O N
German
Italian O N
ON
Spanish
Once you press the
LF/FF
default settings and the next instruction in the selected language
After printing is finished, go to the next step.
5. If you want more help text to be printed, press the
After printing is finished, go to the next step.
If you don't want the help text, press the
then go to the next step immediately.
Note: When you first use the default-setting mode, it's a good
idea to press the button to print the help text before
FONT
changing default settings. The printed text guides you through
the operation. Once you are familiar with the operation, press the
button to skip printing.
LF/FF
6. Use Table B to choose the feature you want to change. Then
press the button as many times as necessary until lights 1
FONT
and 2 match your selection.
Table B: Default settings
7. Press the LF/FF button to change the setting. The
turns on or off to show your selection, as indicated in Table B,
and your new setting is saved automatically and remains in
effect until you change it.
If you are changing the character table, page length, or TOF
position, go to step 8 next. Otherwise, go to step 9.
8. If you are changing the character table, page length, or TOF
position, you must make additional settings as shown in the
tables below. Press the
LF/FF
light indicate your selection. Then press the FONT button
READY
to set the feature.
Once you press the
FONT
item in table B and your setting is saved automatically. The new
setting remains in effect until you change it.
A P - 2 2 5 0 - 1 0
Light 2
ON
BLINK
OFF
ON
BUNK
button, the printer prints the current
FONT
button. You can
LF/FF
READY
button until light 1, light
2,
button, the printer advances to the next
Table C: Character
button.
Table D:
Page length
light
and the
7 / 1 4 / 9 2
table
Q-Pin Printers