Epson 2100 Assembling Instructions page 5

Fig.4
Fig.5
Step 5 Preparation of The Clamps & Inks
Fig.7
Step 6 Positioning the ink Bottles in the Tray
You are now ready to position the ink bottles in the bottle holder tray as indicated below.
Using a pair of scissors separate all tubes by
snipping gently at the tube ends. Please see
Fig.4 to the left.
Strip back all the tubes by approx
150mm. Please note when assembling
the tubes to the bottle caps you may
need to strip back more of the tubing in
order for the bottles to be seated
correctly within the bottle tray.
You are now ready to attach the tube clamp
to the tubes as indicated in Fig.7 to the left.
Now please fill all the bottles with the correct
inks; please ensure that all ink has been filled
correctly as indicated by the bottle caps that
are colour coded, see Fig.8 to the right.
5
Fig.6 showing tubes
stripped back
Fig.8