Epson 1290 Daily Use Manual page 48

When using Windows 2000, you must follow the steps in the
Setup Guide to install the printer software; otherwise,
Microsoft's Universal driver may be installed instead. To
check if the Universal driver has been installed, open the
Printers folder and right-click the icon for your printer. To
open the printer driver, click Printing Preferences on the
shortcut menu that appears, then right-click anywhere in the
driver. If About is displayed in the shortcut menu that
appears, click it. A message box with the words "Unidrv
Printer Driver" appears. You must reinstall the printer
software as described in the Setup Guide. If About is not
displayed, the printer software has been installed correctly.
If the Digital Signature Not Found dialog box appears during
the installation process, click Yes. If you click No, you will
must follow the steps in the Setup Guide to install the printer
software again.
USB driver installation
For Windows Me, 98 and 2000 users, follow the directions below
to ensure that the USB driver is installed correctly.
Note:
The illustrations used in this section show the procedure for
Windows 98.
1. Click the Start button, point to Settings, and click Printers.
Make sure that the icon for your printer appears in the Printers
window.
Select the icon for your printer, then click Properties on the
File menu.
42