Button Clamp - Brother CB3-B917 Service Manual

3-4. Button clamp

Apply grease
342s
343s
CB3-B916A/B917A
3. ASSEMBLY AND ADJUSTMENT
1. With the screw flat of the button clamp lifter arm shaft
all the way back, pass it through the button clamp lifter arm
and then attach it to the button clamp lifter bracket
2. Install the button clamp arm
using the holder bar
the snap and the set screw
3. After inserting the spring
the button clamp lifter bracket
the button arm .
to the feed bracket
. Secure the holder bar
.
and the spring guide
, fit to the depression in
.
using
into
24