Epson Stylus Photo R1800 User Manual page 37

Caution: Don't pause printing or respond to ink messages when your printer is
printing. This may cause your printer to pause and leave an uneven surface on
your printout. If ink is low, wait until printing finishes before checking ink levels or
replacing a cartridge. If you replace an ink cartridge in the middle of a print job, the
quality of your printout may decline. For best results, check ink levels and replace
cartridges, if necessary, before printing large or high-resolution print jobs.
15. To monitor the progress of your print job, click your printer's
Print Center
. You see this screen:
Photo R1800
16. Monitor the progress of your print job or do one of the following:
Click the print job, then click
Click the print job, then click
Click a print job marked "Hold" and click
If multiple print jobs are listed, click a print job, then click the
as necessary to reorder the jobs
17. When you're finished, close your printer's status window (OS X 10.3) or Print
Center (OS X 10.2).
icon when it appears in the dock. Then double-click
Delete
Hold
to delete the job
to pause printing
to resume printing
Resume
Printing From Start to Finish
icon or the
Stylus
arrow
Priority
37