Epson PICTUREMATE PM 225 Basics Manual page 27

After a moment, you see this screen:
6
Connect the USB cable to any open USB port on
your computer. Then connect the other end to the
USB port on the back of PictureMate.
Your PictureMate software is installed.
Note: If you see a screen like this one, remove your
memory card and click the X in the corner to close it.
Note: PictureMate is automatically set as your default
printer. If you have another printer, you can change this
setting in the Windows Control Panel.
7
When you see the Bonus Software Installation
screen, select the items you want and click Install.
25